OK, after seeing that this might be a shortcut problem you will want to double check 2 things. First look at the properties in the shortcut to see where the "start in" setting is. Make sure it is where the executable is located. Second check to see if a "compatibility mode" is set. If it is it shouldn't.
That is about all I can offer at this time. Hope this helps. w2mw Kurt W. Zimmerman My Profile: http://www.linkedin.com/in/kurtwzimmerman --- On Wed, 10/22/08, Kurt Zimmerman <[EMAIL PROTECTED]> wrote: > From: Kurt Zimmerman <[EMAIL PROTECTED]> > Subject: Re: [Dx4win] Problems opening up Help file in 7.05 ? > To: "Jim Reisert AD1C" <[EMAIL PROTECTED]> > Date: Wednesday, October 22, 2008, 10:48 PM > Just wondering what port is being accesses. Port being IP > port. If this is something that just started it is possible > that something might be blocking the port. > > Do you have a machine you can connect directly to the > internet without going through a router? > > Just trying to think of all possibilities. > > 73; > w2mw > > Kurt W. Zimmerman > My Profile: > http://www.linkedin.com/in/kurtwzimmerman > > > > > > --- On Wed, 10/22/08, Jim Reisert AD1C > <[EMAIL PROTECTED]> wrote: > > > From: Jim Reisert AD1C <[EMAIL PROTECTED]> > > Subject: Re: [Dx4win] Problems opening up Help file in > 7.05 ? > > To: "DX4WIN" <[email protected]> > > Date: Wednesday, October 22, 2008, 10:32 PM > > And this was on two different computers, so > there's > > something else going > > on here. > > > > On 10/22/2008 8:30 PM, Jim Reisert AD1C wrote: > > > > > This is the other message, which usually precedes > the > > one below: > > > > > > Could not get help contents > > > Error = 0 > > > The operation completed successfully > > > > > > - Jim > > > > > > On 10/22/2008 8:18 PM, Jim Reisert AD1C wrote: > > >> Is anyone having problems using the on-line > help? > > >> > > >> I get a couple of different message boxes > from > > Help -> Contents, the > > >> current one says: > > >> > > >> "Error = 10035 > > >> A non-blocking socket operation could not be > > completed immediately" > > >> > > >> I never had these problems with 7.04. If I > restart > > the program, Help > > >> will work for a bit, then stop working again. > > >> > > >> I'm running WinXP SP3 with all subsequent > > updates. > > > > -- > > Jim Reisert AD1C/Ø, <[EMAIL PROTECTED]>, > > http://www.ad1c.us > > _______________________________________________ > > Dx4win mailing list > > [email protected] > > http://mailman.qth.net/mailman/listinfo/dx4win _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
