Bill, Looked through 11 years of email, but found only one query if DX4WIN supported the GS232A interface. Other messages were all about using different interface solutions. I downloaded the software document, and it looked simple enough. I added this for the next release.
--Paul, KK4HD AC0W wrote: > I've inquired about this in the past as DX4WIN does not support the Yaesu > rotors. I have provided all the information to add it into DX4WIN. The > response I have received in the past is to purchase an interface box (I > forget the name right now but it was roughly $400 US) at another significant > investment. So my Yaesu rotor is not controlled by DX4WIN while the several > other applications I have can control it. > > If I have to make an significant investment for DX4WIN to communicate to my > Yaesu Rotor that investment will most likely be a different general purpose > logger that can communicate without the special interface box. > > Bill > AC0W > > ---- Wanadoo <[EMAIL PROTECTED]> wrote: > Hello, > > > > I'm using the rotor control DXA from K4JRG. > > Is anybody use this with DX4WIN ? > > I did not see any Yaesu DXA rotators listed (GS-232 protocol) which is what > Yaesu DXA rotor use. > > Many thanks for any information. > > > > 73 F8CIL Pascal > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.175 / Virus Database: 270.9.2/1783 - Release Date: 11/12/2008 > 10:01 AM > > _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
