Check programming on page 30 of the Pro manual for Yaesu programming when using
the
serial ports for rig control. FSK and CW...
Also check by bypassing the PRO to be sure you have DX4WIN and your Yaesu set
correct.
73, Art W6KY
________________________________
From: Charles Ristorcelli <[EMAIL PROTECTED]>
To: dx4win@mailman.qth.net
Sent: Friday, December 5, 2008 11:42:39 AM
Subject: [Dx4win] Rigblaster Pro Interface
Hi everyone.
I am using a Rig Blaster Pro with a Yaesu FT-950. All functions of the Rig
Blaster work as expected.
But in setting up the Rig Blaster pro as described in the manuals, the ability
of having DX4WIN follow the band and mode changes of the radio has been lost.
Is anyone out there using a Rig Blaster Pro with any radio and STILL have
DX4WIN automated response to the radio’s mode?
By that I mean that when using the Rig Blaster for digital modes, the DX4WIN
software tracks band, mode, etc.
73 de NN3V Charlie
_______________________________________________
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win