This is more of a comment than anything else. I have an ICOM 756 Pro III. I also have a microHAM microKEYER to read the frequency of the radio.
I have DX4WIN configured to store the frequency in the "Notes for this QSO" field (via "contest mode'). Before I moved, I occasionally had frequency logging errors in 7.04. The band was usually correct, but the frequency DX4WIN logged could be off by a factor of 10 (i.e. a 40 meter QSO might be at 70,254 KHz instead of 7,025 KHz). I am currently using the 7.2.2 uRouter firmware in the microHAM keyer (I had been using 7.1.5 before that). My radio is set to 19.2K baud. I don't remember what the poll rate in DX4WIN is set to, but I think it's 1000 mS (1 second). Since getting back on the air in August, I have not detected a single frequency logging error. What changed exactly? I'm not sure. It was either something Paul did in 7.05, or the new uRouter firmware. Either way I'm a happy camper. Has anyone using a configuration like this had any frequency logging errors lately? 73 - Jim AD1C -- Jim Reisert AD1C/Ø, <[EMAIL PROTECTED]>, http://www.ad1c.us _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
