Dusty, you have to change the radio to "Elecraft K3 X4" in the preferences. My K3 works just fine with it, including band+mode changes including split.
73, Andreas, N6NU > -----Original Message----- > From: Dusty Chapman [mailto:[email protected]] > Sent: Tuesday, December 16, 2008 3:38 PM > To: Andreas Junge, N6NU; 'Jim Reisert AD1C'; 'DX4WIN Reflector' > Subject: Re: [Dx4win] DX4WIN version 70702 > > Hello DX4WIN Guru's, > It has rained on the parade. K3 won't do any more in 7.07 than it did > with 7.05. When I double click on a spot that has a QSX frequency, it > changes both VFO's to where they belong, but it does not change the mode > on > VFO B and it does not bring up "Split". It does make "Split" blink, but > it > doesn't hold. I am using the latest firmware for the K3 and I also tried > DX4WIN 7.06 with the same results. Is there some "Menu" or "Config" > setting > in the K3 or in DX4WIN that I am not aware of? > Thanks, > Dusty - K3WC > > ----- Original Message ----- > From: "Andreas Junge, N6NU" <[email protected]> > To: "'Jim Reisert AD1C'" <[email protected]>; "'DX4WIN Reflector'" > <[email protected]> > Sent: Monday, December 15, 2008 11:25 PM > Subject: RE: [Dx4win] DX4WIN version 70702 > > > Jim, > > Radio: Is the "Elcraft K3 x4" a new driver? I tested it and it does SPLIT > as > well as band changes while also changing the mode. So far so good :-) > > Mailed Cutoff: still "steals" countries. After a "M" times out it does not > revert to "W", therefore making the worked country disappear in the DXCC > reports. The field appears "blank" and not "W" as expected and it will not > be counted. > > Thanks, > > Andreas, N6NU > > -----Original Message----- > From: Jim Reisert AD1C [mailto:[email protected]] > Sent: Monday, December 15, 2008 4:43 PM > To: DX4WIN Reflector > Subject: Re: [Dx4win] DX4WIN version 70702 > > Now that Paul has released the radio fix, if you were having radio > control problems before, and are *still* having radio control problems > with 7.07, please let Paul or the reflector know. He can't possibly > own and test every radio with DX4WIN personally. > > And of course, the same goes if you were NOT having problems before, > but are now... > > 73 - Jim AD1C > > On Sun, Dec 14, 2008 at 5:00 PM, Paul van der Eijk <[email protected]> > wrote: > > Hi, > > > > Version 707 of DX4WIN is available for download. > > > > This version corrects the problem introduced in 7.06 for all radios to > > change the sequence for send mode and frequency to the radio. > > > > --73, Paul, KK4HD > > -- > Jim Reisert AD1C/Ø, <[email protected]>, http://www.ad1c.us > "Let Not Mankind Bogart Love" - Willie Nelson > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > > -------------------------------------------------------------------------- > ------ > > > > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.176 / Virus Database: 270.9.18/1850 - Release Date: > 12/15/2008 > 5:04 PM _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
