Hi Kay, Don´t know how the setup has to be done for the rigblaster duo but I think It will be normally impossible when you use 2 different radio´s (brand), Every brand use there own commands and howto communicate with their radios. In dx4win and other programs both radios are separately connected and work fine with there own drivers.
BUT If this unit translate all commands for different radios(yaesu-icom-K2-tentec-etc) to one command set (for example kenwood commands) it is maybe possible when you set dx4win to use the kenwood.rig Guy ON4AOI -----Oorspronkelijk bericht----- Van: [email protected] [mailto:[email protected]] Namens Kay Craigie Verzonden: zaterdag 3 januari 2009 20:31 Aan: [email protected] Onderwerp: [Dx4win] DX4WIN / RigBlaster Duo My OM is trying to configure his Elecraft K2 and Yaesu FT-450 to work with a RigBlaster Duo and DX4WIN (7.03.16). The two rigs work fine with DX4WIN if connected to the computer separately as Rig 1 and Rig 2. But with the Duo in line, DX4WIN isn't happy at all. Neither is any other logging software we have on his computer, for that matter. If anyone has successfully configured a RigBlaster Duo with DX4WIN, please contact me. BTW, we've used single-radio RigBlasters in the past without a hitch, so we're not newcomers to West Mountain Radio gear. Thanks & 73 - Kay N3KN _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
