Thanks Guy, The CW Keyer was still running and was the cause of the error. Must remember to stop radio and stop Winkeyer before exiting just in case next time I don't use them. Then there are no issues.
Biggest hassle is when this problem occurs I also can not save changes to the log. Thanks again, Bill AC0W -----Original Message----- From: ON4AOI [mailto:[email protected]] Sent: Monday, March 23, 2009 3:46 AM To: 'Bill AC0W' Cc: [email protected] Subject: RE: [Dx4win] Error Message Bill, This is probably a USB problem, same error occurs when using USB - Winkey and for some unknown WINDOWS reason the serialport number has changed or the device has been removed or shut off B4 DX4WIN is closed. Guy ON4AOI -----Oorspronkelijk bericht----- Van: [email protected] [mailto:[email protected]] Namens Bill AC0W Verzonden: maandag 23 maart 2009 5:06 Aan: 'DX4WIN POSTINGS' Onderwerp: [Dx4win] Error Message Running DX4Win 7.03.16, periodically when exiting I get this message: An exception occurred! Thread Error: Access is denied (5) When I get this error I can not exit DX4Win. The only is to go to Task Manager and end task. Normal occurs when I am not connected to the radio, but I also have Stop Radio selected. I've tolerated it for a while but it is starting to get annoying. Any suggestions? Bill AC0W ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
