Gary, Concerning the reports/waz/submission not being changed is because The qso´s are filled in with subm and saved this way now
If you have a backup log where nothing has been added or changed , you can replace Your log with that one. If not reversing isn´t a big problem but it may take some time/work to correct With F8 you create a report where Upl Cnf = Y and WAZ Band = subm, Now you can change all these qso´s one by one and clear/change the subm to -- Also if Mode = subm change it also to -- (since you have 5bndwaz I don´t suspect one in Mixed) Save every time with F10 Guy ON4AOI > -----Oorspronkelijk bericht----- > Van: [email protected] [mailto:dx4win- > [email protected]] Namens Garry Shapiro > Verzonden: vrijdag 17 april 2009 4:54 > Aan: DX4WIN Reflector > Onderwerp: [Dx4win] Confirmations > > After years of procrastination, I recently pretty much caught up with > DXCC QSLing and turned my attention to WAZ. I earned 5BWAZ several > years > ago and have the certificate, and was planning to bring cards for > several single-band/single-mode WAZ applications to Visalia tomorrow. > Rumor has it that a CQ guy will be there to check WAZ cards. As Murphy > would have it, I stumbled over a glitch. > > I find that, for at least part of my log, downloaded LOTW confirmations > have set not only the UPL CONF flag but the CONF flag, as well. This is > not a problem for DXCC, but WAZ still requires QSL cards. So, when I > went looking for cards that--according to the log-- should have been in > the box, they generally were not, except for QSO's that really have > both > confirmations. > > I discovered this problem after invoking Reports/WAZ/Submission, right > from zone 1. I initially thought the cause was in File/Preferences/QSO, > where Card or Upload was selected. But changing the preference to Card > in Hand and saving it changed the summaries but changed nothing in the > Reports/WAZ/Submission window! > > I have three questions: > > * How did this happen? I suspect that, as a new LOTW user a cuppla > years ago I must have chosen the wrong import option when > downloading the QSL report from LOTW. > * Can it be reversed at this point? I am not looking forward to > serially going through 40,000 QSO's! > * Why isn't the Submission matrix responding to the Preferences > change? > > I am pretty much dead in the water for the WAZ submission at Visalia. I > would like to get this sorted out before Dayton. > > Any enlightenment will be appreciated. > > Garry, NI6T > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
