Hi my 2€ ... from Dx4Win I print labels to a PDF file that i save (i have installed a PDF "printer").
Then i use this PDF file for the actual label print. I can re-print any pages and i also have the PDF file as documentation later of that i can check if in doubt. -- OZ1AXG Flam ----- Original Message ----- From: "John Shaw" <[email protected]> To: <[email protected]> Sent: Wednesday, July 22, 2009 10:07 PM Subject: Re: [Dx4win] Print bureau labels > Hi Hamad, > > If you want to break your QSL print job into smaller lots for safety a > better way is to use the range option when you go to print. This gives > you > a lot more control of the size of each print job and the ability to > recover > with less wastage if the printer jambs or something. > > First rule; make a backup before you start. > > Second: Don't ever say yes to changing the print flags until you are > completely satisfied you have all your cards printed. > > Example: say you have 2000 cards to print, you can break this up into 20 > lots of 100, use ranges 1-100, 101-200 etc. Write these out on paper > before > you start so you can cross them off as each is completed. > > Don't ever say yes to changing the print flags until you are completely > satisfied you have all your cards printed. > > If your printer breaks down during a print you can do that range again, > but > first print to screen and scroll through to find the last good label > printed, then make a note of the page number and make a new range to > complete all after that page to the end of the current range to paper. > This > works very well when printing direct on cards as each page is one card so > you get very little wastage if you printer fails during a print. > > If you don't change the print flags you can resume printing at any time if > you keep a record of where you left off. > > I hope that helps and makes sense. > > 73 John ZL1BYZ. > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] > On Behalf Of Hamad 9K2HN > Sent: Wednesday, 22 July 2009 8:07 p.m. > To: dx4win > Subject: [Dx4win] Print bureau labels > > Hi, > > I do have a question is there a way which I can print bureau labels for > a > specific country? I do have more than 2000 bureau labels to print, and to > print them all together will take very long time (i'm printing directly on > the qsl card) so i thought it will be better if i can specify a country to > print for. any Idea? > > de 9k2hn > Hamad > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.25/2256 - Release Date: 07/23/09 06:02:00 ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
