This bug has been reported... it's an issue with a missing library... here is the fix from K8UT:
"I downloaded and installed DX4W801 and encountered an error message upon launching the program:" "The application failed to initialize properly (Oxc0150002). Click OK to terminate the application" "Most users will not have this problem. DX4Win801 installed properly on 2 PCs here but failed on my Ham Shack PC. After some troubleshooting I determined that DX4Win needed the Microsoft Visual C redistribution library, which can be downloaded from: http://www.microsoft.com/downloads/details.aspx?FamilyID=200b2fd9-ae1a-4a14- 984d-389c36f85647 DX4Win801 is now working properly on my Ham computer." ik1MDF wrote: > PLease help. > I installed into my FLYBOOK the new release 8.01. The installation run > correctly, but when I launch it the X error message appear. > <<<APPLICATION NOT CORRECTLY INIZIALIZED (0xc0150002). PRESS <OK> TO CLOSE > IT>>> > Tried many times, same error. > > Can you explain it? The FLYBOOK is working under XP HOME SP3 - 512 RAM - 995 > MHZ CLOCK. > The relase 5 was working correctly. > > Please note that I use 8.01 on my Dektop PC and on my Ibm Notebok with no > problerm. > > Many thanks for supporting. > > > 73 Lorenzo ik1mdf > > > ----- Original Message ----- > From: <[email protected]> > To: <[email protected]> > Sent: Thursday, August 13, 2009 3:07 AM > Subject: Dx4win Digest, Vol 64, Issue 48 > > >> Send Dx4win mailing list submissions to >> [email protected] >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://mailman.qth.net/mailman/listinfo/dx4win >> or, via email, send a message with subject or body 'help' to >> [email protected] >> >> You can reach the person managing the list at >> [email protected] >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of Dx4win digest..." >> >> >> Today's Topics: >> >> 1. Re: I'm scare to start with Version 8 (Jim Reisert AD1C) >> 2. Re: I'm scare to start with Version 8 (Bob) >> 3. Re: 7O1YGF Approved for DXCC Credit (Jim Reisert AD1C) >> 4. Ver. 8.1 at start. (Stefano Cipriani) >> 5. Re: Ver. 8.1 at start. (Jim Reisert AD1C) >> 6. Ver.8.1 - Groups - Import - Unexpected selection. >> (Stefano Cipriani) >> 7. Re: Ver.8.1 - Groups - Import - Unexpected selection. >> (Jim Reisert AD1C) >> 8. Re: 7O1YGF Approved for DXCC Credit (Terry Dunlap) >> 9. Re: 7O1YGF Approved for DXCC Credit (David Tilley) >> 10. BandMap wildly wrong freq? (Rick Murphy) >> 11. Re: 7O1YGF Approved for DXCC Credit (Jim Reisert AD1C) >> 12. Re: BandMap wildly wrong freq? (Mel) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Wed, 12 Aug 2009 16:32:10 -0600 >> From: Jim Reisert AD1C <[email protected]> >> Subject: Re: [Dx4win] I'm scare to start with Version 8 >> To: Marc Wullaert ON4MA <[email protected]> >> Cc: [email protected] >> Message-ID: >> <[email protected]> >> Content-Type: text/plain; charset=ISO-8859-1 >> >> Hi Marc, >> >> You have the option to install 8.01 in a directory separate from your >> old version. If you run into bad problems with 8, just go back to the >> previous version until they can be resolved. >> >> The biggest problems are in the report manager, and the conversions of >> name, QTH and frequency. If you wait to do the conversion and can live >> with the small report problems, then you will probably be pretty >> happy. >> >> 73 - Jim AD1C >> >> On Wed, Aug 12, 2009 at 4:14 PM, Marc Wullaert >> ON4MA<[email protected]> wrote: >>> Hi folks .... >>> >>> >>> I'm scare to switch over to version 8. I have the new key but i see in my >>> mailbox more than >>> 300msg to read about '' dx4win ver 8.0". >>> >>> Is it working ? >>> >>> marc ON4MA >> -- >> Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us >> >> >> ------------------------------ >> >> Message: 2 >> Date: Wed, 12 Aug 2009 19:09:05 -0400 >> From: Bob <[email protected]> >> Subject: Re: [Dx4win] I'm scare to start with Version 8 >> To: Marc Wullaert ON4MA <[email protected]> >> Cc: [email protected] >> Message-ID: <[email protected]> >> Content-Type: text/plain; charset=ISO-8859-1; format=flowed >> >> Hi Marc, >> >> Since you already have purchased the key it is OK to >> install it. It will install in a separate directory in the root >> directory . My old version ( 5.02) was and still is in a directory >> under the program files. So both versions are available and run from >> separate shortcuts on my desktop. >> >> I have an issue with the reports but in many ways are >> happy with the new reports. I feel my issues will be addressed and they >> are not a show stopper. >> >> Back it up before you start and follow these notes and >> you should be just fine with both version. >> >> >> http://dx4win.ad1c.us/appnotes/upgrade.htm >> >> 73, >> Bob >> K2TK >> >> >> Marc Wullaert ON4MA wrote: >>> Hi folks .... >>> >>> >>> I'm scare to switch over to version 8. I have the new key but i see in my >>> mailbox more than >>> 300msg to read about '' dx4win ver 8.0". >>> >>> Is it working ? >>> >>> marc ON4MA >>> >>> >>> >>> >> >> >> ------------------------------ >> >> Message: 3 >> Date: Wed, 12 Aug 2009 17:12:34 -0600 >> From: Jim Reisert AD1C <[email protected]> >> Subject: Re: [Dx4win] 7O1YGF Approved for DXCC Credit >> To: W9RPM <[email protected]> >> Cc: DX4WIN Reflector <[email protected]> >> Message-ID: >> <[email protected]> >> Content-Type: text/plain; charset=ISO-8859-1 >> >> On Wed, Aug 12, 2009 at 5:09 PM, W9RPM<[email protected]> wrote: >> >>> Jim, How do I change this to valid DX. I worked them, but put them down >>> as >>> invalid DX. Thanks- John >> Expand the QSO window using F5 until you see the award flags. >> >> Use F8 to search for 7O1YGF. >> >> If you're using 8.01, change all three DXCC flags (Mixed/Band/Mode) >> from "I" to "--". >> >> If using an earlier version, find the "Invalid DX" flag and change it to >> "N". >> >> 73 - Jim AD1C >> >> -- >> Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us >> >> >> ------------------------------ >> >> Message: 4 >> Date: Thu, 13 Aug 2009 01:21:59 +0200 >> From: "Stefano Cipriani" <[email protected]> >> Subject: [Dx4win] Ver. 8.1 at start. >> To: "DX4WIN Reflector" <[email protected]> >> Message-ID: <3e1b10ec57214f42b4027efafc386...@i0mwisteve01> >> Content-Type: text/plain; charset="iso-8859-1" >> >> Paul, >> starting the program, the focus is not in the QSO window. >> We must clic on the window to activate it. >> All ok in previous version. >> Stefano, I0MWI >> >> >> >> >> -- >> Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP >> autenticato? GRATIS solo con Email.it http://www.email.it/f >> >> Sponsor: >> Per il tuo cellulare c'? m.email, hai tutto il web e la posta elettronica >> nella tua mano. Provalo gratuitamente >> Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=8922&d=13-8 >> >> >> ------------------------------ >> >> Message: 5 >> Date: Wed, 12 Aug 2009 17:28:50 -0600 >> From: Jim Reisert AD1C <[email protected]> >> Subject: Re: [Dx4win] Ver. 8.1 at start. >> To: Stefano Cipriani <[email protected]> >> Cc: DX4WIN Reflector <[email protected]> >> Message-ID: >> <[email protected]> >> Content-Type: text/plain; charset=ISO-8859-1 >> >> On Wed, Aug 12, 2009 at 5:21 PM, Stefano Cipriani <[email protected]> wrote: >> >>> starting the program, the focus is not in the QSO window. >>> We must clic on the window to activate it. >>> All ok in previous version. >> Hi Stefano, >> >> Why is this a problem? Don't you need to either use F9 or the QSO >> menu to start logging new QSOs? By doing so, focus shifts to the QSO >> window. >> >> 73 - Jim AD1C >> >> -- >> Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us >> >> >> ------------------------------ >> >> Message: 6 >> Date: Thu, 13 Aug 2009 01:47:44 +0200 >> From: "Stefano Cipriani" <[email protected]> >> Subject: [Dx4win] Ver.8.1 - Groups - Import - Unexpected selection. >> To: "DX4WIN Reflector" <[email protected]> >> Message-ID: <2b75ca5394264dedbb67d7fcbb6ae...@i0mwisteve01> >> Content-Type: text/plain; charset="iso-8859-1" >> >> Paul ... and BetaTesters (!), >> Very strange result found: >> 1? - Exported a selected group 001 from my V.8.1 log, >> using a DX4WIN8 export file.(I0MWI_001.DXQ) >> 2? - File / New log, creating a new I0MWI_TEST.DXL >> 3? - Added a dummy qso in group 000. >> 4? - Edit/Add more groups (001 - 002 - 003 - 004) >> 5? - Exit the program >> 6? - Open again and import the I0MWI_001.DXQ. >> 7? - Deleted the dummy qso. >> 8? - Exit, then open again the I0MWI_TEST.DXL >> 9? - The program show only the QSOs, that have the >> new field "Freq KHz" populated with a frequency. >> NOT FILTER ACTIVATED, but is necessary go to >> Filter/Cancel filter to have all QSOs selected. >> This happen any time I open the I0MWI_TEST.DXL.... >> >> If I open the regular I0MWI.DXL, mouved from vers. 7 >> all is OK........ >> >> So Good Hunting............ >> 73 >> Stefano, I0MWI >> >> >> >> -- >> Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP >> autenticato? GRATIS solo con Email.it http://www.email.it/f >> >> Sponsor: >> Servizi Internet sul tuo cellulare con m.email, installalo gratuitamente e >> fai nuove scoperte >> Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=8921&d=13-8 >> >> >> ------------------------------ >> >> Message: 7 >> Date: Wed, 12 Aug 2009 18:03:49 -0600 >> From: Jim Reisert AD1C <[email protected]> >> Subject: Re: [Dx4win] Ver.8.1 - Groups - Import - Unexpected >> selection. >> To: Stefano Cipriani <[email protected]> >> Cc: DX4WIN Reflector <[email protected]> >> Message-ID: >> <[email protected]> >> Content-Type: text/plain; charset=ISO-8859-1 >> >> This is due to the "," in the Frequency field (European Windows >> versions). Been discussed on the reflector before. I'm sure it's on >> Paul's list. >> >> 73 - Jim AD1C >> >> On Wed, Aug 12, 2009 at 5:47 PM, Stefano Cipriani<[email protected]> wrote: >>> Paul ... and BetaTesters (!), >>> Very strange result found: >>> 1? - Exported a selected group 001 from my V.8.1 log, >>> using a DX4WIN8 export file.(I0MWI_001.DXQ) >>> 2? - File / New log, creating a new I0MWI_TEST.DXL >>> 3? - Added a dummy qso in group 000. >>> 4? - Edit/Add more groups (001 - 002 - 003 - 004) >>> 5? - Exit the program >>> 6? - Open again and import ?the I0MWI_001.DXQ. >>> 7? - Deleted the dummy qso. >>> 8? - Exit, then open again the I0MWI_TEST.DXL >>> 9? - The program show only the QSOs, that have the >>> new field "Freq KHz" populated with a frequency. >>> NOT FILTER ACTIVATED, but is necessary go to >>> Filter/Cancel filter to have all QSOs selected. >>> This happen any time I open the I0MWI_TEST.DXL.... >>> >>> If I open the regular I0MWI.DXL, mouved from vers. 7 >>> all is OK........ >>> >>> So Good Hunting............ >>> 73 >>> Stefano, I0MWI >> >> -- >> Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us >> >> >> ------------------------------ >> >> Message: 8 >> Date: Wed, 12 Aug 2009 17:11:52 -0700 >> From: Terry Dunlap <[email protected]> >> Subject: Re: [Dx4win] 7O1YGF Approved for DXCC Credit >> To: Jim Reisert AD1C <[email protected]> >> Cc: DX4WIN Reflector <[email protected]> >> Message-ID: <[email protected]> >> Content-Type: text/plain; charset=ISO-8859-1; format=flowed >> >> Jim, >> >> I think you mean "If using an earlier version, change the 'ValidDX' flag >> from Invalid to Valid" >> >> 73 de Terry KK6T >> >> PS - This is great news!!! >> >> Jim Reisert AD1C wrote: >>> On Wed, Aug 12, 2009 at 5:09 PM, W9RPM<[email protected]> wrote: >>> >>> >>>> Jim, How do I change this to valid DX. I worked them, but put them down >>>> as >>>> invalid DX. Thanks- John >>>> >>> Expand the QSO window using F5 until you see the award flags. >>> >>> Use F8 to search for 7O1YGF. >>> >>> If you're using 8.01, change all three DXCC flags (Mixed/Band/Mode) >>> from "I" to "--". >>> >>> If using an earlier version, find the "Invalid DX" flag and change it to >>> "N". >>> >>> 73 - Jim AD1C >>> >>> >> >> ------------------------------ >> >> Message: 9 >> Date: Wed, 12 Aug 2009 20:18:12 -0400 >> From: David Tilley <[email protected]> >> Subject: Re: [Dx4win] 7O1YGF Approved for DXCC Credit >> To: DX4WIN Reflector <[email protected]> >> Message-ID: <[email protected]> >> Content-Type: text/plain; charset=ISO-8859-1; format=flowed >> >> I don't see anything on the ARRL website saying that 7O1YGF is being >> accepted. Where is that information coming from? >> >> >> ------------------------------ >> >> Message: 10 >> Date: Wed, 12 Aug 2009 20:19:13 -0400 >> From: Rick Murphy <[email protected]> >> Subject: [Dx4win] BandMap wildly wrong freq? >> To: DX4WIN <[email protected]> >> Message-ID: >> <[email protected]> >> Content-Type: text/plain; charset=ISO-8859-1 >> >> I'm just starting out with DX4WIN 8; the rig is a IC-756 Pro III. >> When I use the bandmap with "Follow radio" checked, it's pretty broken >> due to completely wrong frequencies. >> >> For example, the rig is showing 50.125 Mhz right now. The band map >> says "717,415.56 6m". It's sort of stable at that reading (sometimes >> showing the right freq, usually not) until I spin the dial, then it'll >> catch up for a few seconds until going to another bogus frequency. >> >> There's a pattern - usually 717,xxxx for 6m. Or, switching the rig to >> 20m (14,004.00) shows "475,416.56 20m". Or "1,400,526.00 20m". >> (Currently it's swithcing between "14,005.08", "1,400,508.00", and >> "475,416.56" in the bandmap.) >> >> The rig is set with default address, 9600 baud, CI-V transceive off. >> DX4WIN set to poll at 5000 ms. >> >> How do I make this work right? Seems like a useful feature if it was >> actually usable. :-) >> 73, >> -Rick >> -- >> Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA >> >> >> ------------------------------ >> >> Message: 11 >> Date: Wed, 12 Aug 2009 18:20:06 -0600 >> From: Jim Reisert AD1C <[email protected]> >> Subject: Re: [Dx4win] 7O1YGF Approved for DXCC Credit >> To: Terry Dunlap <[email protected]> >> Cc: DX4WIN Reflector <[email protected]> >> Message-ID: >> <[email protected]> >> Content-Type: text/plain; charset=ISO-8859-1 >> >> Thanks for the correction, Terry. I was typing from my (poor) memory. >> >> - Jim >> >> On Wed, Aug 12, 2009 at 6:11 PM, Terry Dunlap<[email protected]> wrote: >>> Jim, >>> >>> I think you mean "If using an earlier version, change the 'ValidDX' flag >>> from Invalid to Valid" >>> >>> 73 de Terry KK6T >>> >>> PS - This is great news!!! >>> >>> Jim Reisert AD1C wrote: >>>> On Wed, Aug 12, 2009 at 5:09 PM, W9RPM<[email protected]> wrote: >>>> >>>> >>>>> Jim, How do I change this to valid DX. I worked them, but put them down >>>>> as invalid DX. Thanks- John >>>>> >>>> Expand the QSO window using F5 until you see the award flags. >>>> >>>> Use F8 to search for 7O1YGF. >>>> >>>> If you're using 8.01, change all three DXCC flags (Mixed/Band/Mode) >>>> from "I" to "--". >>>> >>>> If using an earlier version, find the "Invalid DX" flag and change it to >>>> "N". >> -- >> Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us >> >> >> ------------------------------ >> >> Message: 12 >> Date: Wed, 12 Aug 2009 21:07:22 -0400 >> From: Mel <[email protected]> >> Subject: Re: [Dx4win] BandMap wildly wrong freq? >> To: Rick Murphy <[email protected]> >> Cc: DX4WIN <[email protected]> >> Message-ID: <[email protected]> >> Content-Type: text/plain; charset=ISO-8859-1; format=flowed >> >> It sounds like you have the CI-V transceive function turned on causing >> data collisions. This is not recommended with DX4Win. Turn it off as per >> instructions and it should work fine. I would prefer Paul support >> transceive mode... but that isn't likely to happen soon... >> >> VE2DC... Mel >> >> Rick Murphy wrote: >>> I'm just starting out with DX4WIN 8; the rig is a IC-756 Pro III. >>> When I use the bandmap with "Follow radio" checked, it's pretty broken >>> due to completely wrong frequencies. >>> >>> For example, the rig is showing 50.125 Mhz right now. The band map >>> says "717,415.56 6m". It's sort of stable at that reading (sometimes >>> showing the right freq, usually not) until I spin the dial, then it'll >>> catch up for a few seconds until going to another bogus frequency. >>> >>> There's a pattern - usually 717,xxxx for 6m. Or, switching the rig to >>> 20m (14,004.00) shows "475,416.56 20m". Or "1,400,526.00 20m". >>> (Currently it's swithcing between "14,005.08", "1,400,508.00", and >>> "475,416.56" in the bandmap.) >>> >>> The rig is set with default address, 9600 baud, CI-V transceive off. >>> DX4WIN set to poll at 5000 ms. >>> >>> How do I make this work right? Seems like a useful feature if it was >>> actually usable. :-) >>> 73, >>> -Rick >> >> ------------------------------ >> >> _______________________________________________ >> Dx4win mailing list >> [email protected] >> http://mailman.qth.net/mailman/listinfo/dx4win >> >> >> End of Dx4win Digest, Vol 64, Issue 48 >> ************************************** >> > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
