Jim, I knew you would have the SOLUTION! That worked FB! I put a date in of 01-01-2009 and actually got 103 confirmations from qsos, I suppose that had been confirmed after subsequent downloads. I suppose this is an exercise that one should do from time to time as I have also myself been adding really old qsos from my paper log to DX4Win and uploading those from time to time. The stations I worked obviously would not get those if they did not go back a while occasionally when doing downloads.
Thank you very much 73 Andy G3SVD -----Original Message----- From: Jim Reisert [mailto:[email protected]] On Behalf Of Jim Reisert AD1C Sent: 28 August 2009 15:57 To: Andy Hewitt Subject: Re: [Dx4win] ZK2V LoTW always starts downloading from the LAST day you downloaded, so it only has new confirmations. Try downloading lotwreport.adi again, but this time with a really old starting date, and see if the ZK2V QSOs are found in the lotwreport.adi file. THEN import LoTW into DX4WIN using "duplicate QSO sets Upl Conf flag". - Jim On 8/28/2009 12:44 AM, Andy Hewitt wrote: > Jim, > Thanks. > > I am still using version 7.06 of DX4Win. > > I cannot be sure that it was included in a download as the most recent > download replaced the previous one in the SAVE folder. If it was not > included I cannot think why not as Chris uploaded his logs to LoTW within a > day or so of finishing his stint on ZK2 and I saw then that I had the > relevant crosses in the matrix. > > 73 > Andy G3SVD > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of Jim > Reisert AD1C > Sent: 27 August 2009 22:15 > To: Andy Hewitt > Cc: [email protected] > Subject: Re: [Dx4win] ZK2V > > On Thu, Aug 27, 2009 at 2:39 PM, Andy Hewitt<[email protected]> > wrote: > >> I worked Chris ZK2V on 20m on three modes. My qsos were uploaded to LoTW > in >> June and were immediately shown ad QSL'd. They appear as such in the Award >> Credit Matrix with X for each mode and 20m. Since that date I have >> downloaded a lotw report a couple of times but this entity does not flip > the >> UPL cfm flag to Y in DX4Win. Can anyone suggest why? Can I just do it >> manually? > > Are you 100% sure that ZK2V was in the ADIF file you downloaded from LoTW? > > What version of DX4WIN are you using? > > If version 8, in your DXCC award preferences, are both QSL and LoTW checked? > > - Jim > -- Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
