>Looking for someone who is using an ICOM-761 with DX4WIN. Which radio >file do you use? what is the address for the radio?
I don't have one, but it's my understanding that the IC-761 is essentially an IC-751 in a bigger box. I took a look at the Icom CI-V Reference Manual and it indeed shows the same command set for the 751, 751A and 761. I also had a look at my file of the 761 manual, which shows how to configure the radio. The manual doesn't really say what the address is, but it shows a drawing of the DIP switch (S2) that sets it. According to the CI-V reference manual, the default address is 1E hex. The default baud rate is 1200, also changeable via another DIP switch (S1). It will also be necessary to turn Transceive mode off on S1 to make the radio "play nice" with most software. This information appears on page 26 of the 761 manual. Hope this helps. 73... Randy, W8FN ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
