The MicroKeyer works fine here. It's using a K1EL Winkey chip and the setting in Preferences>CW should be Winkey.
73, Kjell, PB3SM - SM6CPI > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of ON4AOI > Sent: 03 September 2009 12:00 > To: [email protected] > Subject: Re: [Dx4win] dx4winv.v 801 > > Not sure if the MicroHam keyer is working or not Because I > don´t have one but I think there are users That are using it > with dx4win. > I use a Winkeyer (K1EL chip) that is supported By DX4WIN but > the problem you have is related to The USB serial Port, I can > simulate the exception When I disconnect my keyer b4 shutting > down DX4WIN. > Make sure when you setup this USB to serial port that All is ok. > > Guy ON4AOI > > > -----Oorspronkelijk bericht----- > > Van: [email protected] [mailto:dx4win- > > [email protected]] Namens Ian & Steph Fugler (G4IIY) > > Verzonden: donderdag 3 september 2009 11:37 > > Aan: Ken Chandler; [email protected] > > Onderwerp: Re: [Dx4win] dx4winv.v 801 > > > > i also have the microham keyer. i cannot get it to send cw > thru D4W, > > although it works fine with N1MM. > > > > > > ----- Original Message ----- > > From: "Ken Chandler" <[email protected]> > > To: "'Ian & Steph Fugler (G4IIY)'" <[email protected]> > > Sent: Thursday, September 03, 2009 9:34 AM > > Subject: RE: [Dx4win] dx4winv.v 801 > > > > > > > Yes, Have MicroHam keyer 2 um, that's why the cw won't work on > > dx4win, OK > > > thanks I'll take a look see. > > > > > > Ken..G0ORH > > > > > > -----Original Message----- > > > From: Ian & Steph Fugler (G4IIY) [mailto:[email protected]] > > > Sent: 03 September 2009 09:29 > > > To: Ken Chandler; [email protected] > > > Subject: Re: [Dx4win] dx4winv.v 801 > > > > > > I got that when I tried to set up the Com ports for CW > keying. Have > > you > > > changed those? > > > > > > Ian > > > ----- Original Message ----- > > > From: "Ken Chandler" <[email protected]> > > > To: <[email protected]> > > > Sent: Thursday, September 03, 2009 9:08 AM > > > Subject: [Dx4win] dx4winv.v 801 > > > > > > > > >>I cannot close dx4win V80.1 I get an error up saying an....an > > exception > > >> occurred, thread error (5) > > >> > > >> > > >> > > >> Any idea what's wrong! > > >> > > >> > > >> > > >> Ken..G0ORH > > >> > > >> ______________________________________________________________ > > >> Dx4win mailing list > > >> Home: http://mailman.qth.net/mailman/listinfo/dx4win > > >> Help: http://mailman.qth.net/mmfaq.htm > > >> Post: mailto:[email protected] > > >> > > >> This list hosted by: http://www.qsl.net Please help support this > > >> email list: http://www.qsl.net/donate.html > > > > > > > ______________________________________________________________ > > Dx4win mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net Please help support > this email > > list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
