It has been this way in DX4WIN for some time. There are many cases where you need to enter a 3-digit RST for SSB contacts, i.e.:
Aurora: 57A 73 - Jim AD1C On 10/17/2009 7:41 AM, LY2CX wrote: > Lost a good feature in the v 8.02. > > In the old version V1.2, when use Real-time ( F9) or Off-time entry and > SSB mode - rstS and rstR fields set to > two digit (59) > After entry in the field rstS two digits (e.g. 59) the cursor jumps > to the next field rstR - this was in the old 1.2 version. > > In the new one (8.02) when use Real-time ( F9) or Off-time entry and SSB > mode > rstS and rstR set also to two digit, BUT, > after enter to the field rstS two digits (e.g. 59) the cursor > stays here and I need to use TAB key to get in the next field as well > as to get out of the rstR. > And this is needed to repeat with every logged QSO. It slows down > logging. > > This Tab key is not needed when CW, but when SSB. > > Is this the way for ever, or some settings can help to solve this ? > > Regards, > Vigis, LY2CX -- Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
