Hi Jim, If you have your rotator controlled by dx4win its easy to setup. Under rotator you have the tab Parameters where you can setup for each band An offset and also a correction for the selected band.
Guy ON4AOI > -----Oorspronkelijk bericht----- > Van: [email protected] [mailto:dx4win- > [email protected]] Namens Jim Reisert AD1C > Verzonden: zaterdag 17 oktober 2009 19:27 > Aan: DX4WIN Reflector > Onderwerp: Re: [Dx4win] Headings > > DX4WIN beam headings are referenced to the geographic North Pole - 90 > degrees North Latitude. There is no way for DX4WIN to know the heading > to magnetic north from your particular QTH. I am not aware of ANY > program that can do this. > > What DX4WIN should have, and I can't find it at the moment, is a way to > program an offset into the rotator control. Then if your antennas were > aligned to magnetic North, DX4WIN could compensate for this. Maybe Guy > ON4AOI knows if such a feature exists. > > 73 - Jim AD1C > > -- > Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
