In my 706MKIIG manual I have crossed out "4E" and written in "58." I use 58 with 8.02 and it works. I don't know where I picked up this info, but apparently there's an error in the 706 manual.
73, Joe K2XX Peter Archibald wrote: > Have tried different combinations to get DX4WIN to work with 706MKIIG. After > a minute or so, a window appears and say's radio timed out. Radio address > now set to 4E and baud rate auto. Program now set to address 4e and baud > rate to 19200. Have DX4WIN Version 8.02. > > Using a rigtalk from west mountain radio. Windows say's unit ok? > > Thanks; Peter/W4ZGR > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
