Hi George, Easy if you have DX4WIN8.xx You can setup in prefenences the steppIR connection via another Serial port, how to is explained in the helpfile with drawings of the Connections
Guy ON4AOI > -----Oorspronkelijk bericht----- > Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- > boun...@mailman.qth.net] Namens george > Verzonden: donderdag 19 november 2009 19:10 > Aan: dx4win@mailman.qth.net > Onderwerp: [Dx4win] My new Icom IC-7600 and my SteppIR interface, how > to hook up??? > > Since I purchased the new Icom IC-7600 that has a computer USB > interface I > can't figure out how to interface my SteppIR control box with it's > RS232 > interface. > > The Com port assigned to the 7600 is a virtual com port interface for > the > 7600 using the USB interface. I'm using DWAIN for my logging program. > > In the past I used a Y cable that was between my rig and my computer > and the > SteppIR box. > > Anyone have an idea how I can get DX4WIN, 7600, and the SteppIR control > box > to change frequency or how it should be interfaced to my computer??? > Thanks > George W2YJ > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
