Roger N1RJ wrote:
> Mine does it too as well as putting the split freq in the freq
> window. I discovered that the rig file without the X4 works OK.
Then added:
> I just discovered that the K# file without X4 seems to set freqs and
> bandwidth OK but doesn't set the split to on.
Here are the differences between the two .RIG files (use a fixed-width
font). Maybe someone can figure out how to get the best of both
worlds:
MODEL=Elecraft K3 | MODEL=Elecraft K3 X4
DATE=39734 | DATE=39735
[RC-Clear Clarifier] <
CSTR=RC; <
CDELAY=0 <
LEN=0 <
LOC=Other <
<
CSTR=FR0;FT0; | CSTR=FT1;
> [RC-Select VFO B]
> CSTR=K31;SWH58;SWT13;SWT13;K30;
> CDELAY=520
> LEN=0
> LOC=VFO A&B
>
CSTR=MD0; | CSTR=MD0;FT0;FR0;
CSTR=FR0; | CSTR=;
[RC-Set Split on] <
CSTR=FT1; <
CDELAY=0 <
LEN=0 <
LOC=VFO A&B <
<
CDELAY=0 | CDELAY=520
CDELAY=0 | CDELAY=520
> [RF-Write Mode A&B]
> CMD=No Command
> FMT=BCD
> POS=0
> LM=0
--
Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us
______________________________________________________________
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
