OS:XP Brand of Desktop =Dell B110 Real serial on boardTo be sure check in control panel|system|device manager if the comport is installed ok normally it should be Yes it is and it works with V7.05/7.04 9600 = Baud 8 bits None=parity 1 stopbit None=flow control
DX4WIN SETUP COMPORT = COM1 (on board)DELAY = 1 CW = DTR PTT = RTS CW keying via com port 1 works with ver V7.05/7.04, not with V8.03 with same everything.Cw just hangs and I have to select NO com port to turn it off with V8.03Now, I have tried the LPT Port and I like to run 2 radio's and key via the keyboard. V8.03 keys radio #1 CW Good but on radio #2 it just sends ditdah ditdah ditdahditdah ditdah no matter what I send via the keyboard. Also the LPT driver seems to slow the computer down????I have tried it on 2 computers (p4's 2.5g w/2g Ram )and I had to uninstall the driver to speed up my computers. Is anyone else having keying issues with XP????I have setup and run LPT port with V7.04 in the past with 2 radio's and had no porblem with my SO2R box. I don't know what is going on with V8.03??I have spent 2 days trying to find a solution. Like I stated before I can run the older versions with no trouble.Other programs WL/N1MM work fine so I have to say at this point it's DX4WIN V 8.03.Any help is appreciated,HNY Wayne N2WK ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
