Jim Yes I did as suggested and I can now send CW from DX4WIN v8.03.
Congratulations to Dave N4IG for finding the solution to this problem. 73 Ian, G3RVM > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Jim Reisert AD1C > Sent: 23 March 2010 16:03 > To: Ian Trusson > Cc: Dave Mayor; [email protected] > Subject: Re: [Dx4win] ver 8.03 CW problem > > On Tue, Mar 23, 2010 at 4:53 AM, Ian Trusson > <[email protected]> wrote: > > > Sorry not being a PC expert, I don't understand what you > are saying. > > Has the v 8.03 CW sending problem been identified? Here I > send using > > DTR on COM1 and have no LPT port on my new W7 PC. Do your > comments offer a solution for me? > > What do I need to do exactly? > > Hi Ian, > > I think what Dave is suggesting is to install the LPT driver > anyway by running "lptdriver" in the dx4w803\drivers > directory, then see if your COM port CW keying works. > > Could others who are having the CW keying problem please try > this possible "solution" and report back to the reflector? > > 73 - Jim AD1C > > > From: Dave Mayor N4IG > > Sent: 23 March 2010 05:04 > > To: [email protected] > > Subject: [Dx4win] ver 8.03 CW problem > > > > Hi all; > > > > I don't need a LPT driver but it occurred to me that since the cw > > generator was in vichw11.sys and Dx4Win doesn't use that driver > > anymore that the cw generator was moved to the LPT driver. Sooooo I > > installed it and guess what happened.. > > Your right my problem went away. > > > > I now have DX4WIN, WriteLog and MMTTY all working under Windows 7 > > with no problems . > > > > 73 Dave N4IG > > -- > Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
