Should be easy Brian; 1) Filter the QSO's in question - F8; select the group name; and maybe that dates of the QSO's you need to change
2) Select QSO , Multiple QSOs operations, Set Group Number ; then change Group number !! I think thhat there was something special about ) by the way; you normally only use 1 upwards !! 73 Dave G3NKC On 09/04/2010 05:18, [email protected] wrote: > > > I'm running version 5.03 on an old computer system (long story). I have an > ADIF file that I transfer into DX4WIN and it when very smoothly, however all > the contacts went into "Group 1" and should have been group 0. I do use group > 1 from time to time for certain contacts, but not these ones. > > Is there a way to search out these 3000+ contacts and edit them all at the > same time to show group 0? > > Thanks, > Brian - NX0X > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
