I suggest also to file>preferences> Radio tab on the left of DTR and RTS there is a box says Max tries. Make this 1 to limit the time dx4win tries to find the radio. My Mark v works fine with 1 try, i don't need the default 3. Kostas sv1dpi ----- Original Message ----- From: "Jim Reisert AD1C" <[email protected]> To: "Steve Thompson" <[email protected]> Cc: "DX4WIN REFLECTOR" <[email protected]> Sent: Wednesday, April 21, 2010 7:20 AM Subject: Re: [Dx4win] Starting and Stopping Radio
> On 4/18/2010 1:41 PM, Steve Thompson wrote: > >> I've got DX4WIN (version 8.03) working with the Yaesu FT-1000D from its >> CAT >> terminal to my PC's serial port. When I am done operating and turn off >> the >> radio, then DX4WIN locks up for a brief period - apparently it is looking >> for the radio, can't find it, and then when it gives up, I get an error >> message that says "Radio timed out, radio interface has been disabled". >> I >> understand that issue, and figure that prior to powering off the radio, I >> need to use DX4WIN's "Radio" menu to "Stop Radio". > > You don't need to stop the radio. Just make sure you are not in "Add > QSO" mode, by typing ESCape. Your log should be at the last logged QSO. > I do this all the time, it works fine. > > 73 - Jim AD1C > > -- > Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
