Hi Jim, I forgot to look at your outstanding Application Notes.
I spent hours trying to get this to work and in two minutes after reading your Application Note it was working. I didn't know about Alt S to set up the PTT Key Line. Thanks for all your contributions! 73, Bud W3LL [email protected] ----- Original Message ----- From: "Jim Reisert AD1C" <[email protected]> To: "Bud Governale, W3LL" <[email protected]> Cc: <[email protected]> Sent: Saturday, June 19, 2010 1:16 AM Subject: Re: [Dx4win] Keying MMTTY Bud, have you read the MMTTY application note: http://dx4win.ad1c.us/ If you have MMTTY working stand-alone, you're half-way there. Make sure the COM port you are using for PTT/FSK isn't being used by anything else (check your preferences). 73 - Jim AD1C On Fri, Jun 18, 2010 at 10:50 PM, Bud Governale, W3LL <[email protected]> wrote: > I'm trying to get DX4WIN to key MMTTY on my IC-7000. > When clicking on a DX4WIN macro RTTY button, I can hear the tones playing but > the Icom IC-7000 is not being keyed. > > I have the path to the MMTTY executable set in the DX4WIN RTTY preference > window. > > I can open the MMTTY program and send RTTY FSK directly from MMTTY. This > indicates that the two transistor FSK keying > cable (PTT and FSK) is functioning properly thru its com port. > If DX4WIN is open at the same time then the MMTTY program cannot open its com > port. I have to close DX4WIN to use > MMTTY > as a stand alone program. > > I can send CW properly in DX4WIN thru the FSK keying cable com port. > I don't understand why DX4WIN cannot key MMTTY. > > What am I doing wrong? > > 73, > > Bud W3LL > [email protected] -- Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
