Yes Larry this is possible Go in preferences - QSO tab - change the band in the CW frequency Cutoff to 6M and then change in the place below
Save changes and exit Guy ON4AOI > -----Oorspronkelijk bericht----- > Van: [email protected] [mailto:dx4win- > [email protected]] Namens L Emery > Verzonden: vrijdag 9 juli 2010 14:38 > Aan: [email protected] > Onderwerp: [Dx4win] 6M mode changeover ver 8.04 > > Is it possible to set the 6M mode changover frequency ? When clicking > on a 6M spot the DX4Win logging window, and thus the Elecraft K3 Mode, > will automatically revert to SSB mode on any frequency from 50.100 and > up. Is it possible to set this frequency to crossover from CW to SSB > in the dx4win MODE window to around 50.120 mhz. > > Larry K1UO > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
