Dear Group: With a couple of helpful suggestions from Jim AD1C, I was
eventually able to print labels just for one Group. It is not a simple
procedure. Here is a copy of what I think eventually worked.
-----
Steps needed to effect printing labels for QSOs of one group that has Y in
Label:
1. File | Preferences
Personal tab
Set User Level = Expert
File | Save Changes and Exit
2. Filter | Edit Group Names
cycle Add to get the numbers of all groups that might be of interest to show
OK
3. Filter | Selection
In Current Selection type a name for the group of interest
Add
In Group Name find the number of the group of interest and double-click
Check the Group Filter box
Click Update
OK
4. QSLs | Print QSL Labels
only QSOs in the desired group that have Y in Label will have labels printed
5. Filter | Selection
Select: All QSOs
----------
It is expected that this will help others. 73, Mac N8TT
J. McLaughlin; Michigan, USA
Home: [email protected]
----- Original Message -----
From: "J. C. Mc Laughlin" <[email protected]>
To: <[email protected]>
Sent: Wednesday, August 25, 2010 7:27 PM
Subject: Printing labels of one "group"
> Goal is to print labels corresponding to QSOs having one group number and
> only that group number.
>
> Please indicate, step-by-step how one in v8.03 causes the following to
> happen:
>
> How does one get dx4win ONLY to print labels for QSOs having a Y in the
> label box and having a particular group number?
>
> Lots of time was spent in experimenting and reading Help to no avail.
>
> Thanks, Mac N8TT
>
> J. McLaughlin; Michigan, USA
> Home: [email protected]
______________________________________________________________
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
