Could DX4WIN respond to the ASCII format of the USB output when setting the > menu to DECODE?
No that won't work. "Decode" is not used for rig communication. On 2010-09-24 09:54, george wrote: > I've solved the problem with data clashes between DX4WIN and my Icom PW1 amp > and the IC-7600 rig by modifying the 7600 rig file in DX4WIN to stop DX4WIN > from polling the 7600 for frequency but I'm not satisfied. > > > > DX4WIN forces me into CIV data addresses in the preferences "radio" files > for the 7600. Since my PW1 and DX4WIN are forced to have the same CIV > address that's where the problem lies. Data clashes. > > > > The IC-7600 only has a USB to computer interface and does not have a RS232 > like the 7700 or the 7800 which do not utilize CIV addresses. > > > > Since the 7600 menu choices for USB serial function are "CI-V or DECODE" > would 'decode' help if I could get DX4WIN to answer to decode? What is > "decode" anyway? The 7600 book says "DECODE: outputs decoded contents in > ASCII code format". > > Could DX4WIN respond to the ASCII format of the USB output when setting the > menu to DECODE? > > > > Maybe a different rigs rig file would work? > > > > I'm not a computer geek so this is a hunt and peck fixem for me. > > > > Thanks. > > > > George W2YJ > > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
