Disregard the note below. The radio doesn't work now in WinXP either, so obviously there is an additional failure in the system. Nothing like having multiple failures at the same time!
73, John, K9EL -----Original Message----- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of John, K9EL Sent: Thursday, January 20, 2011 1:22 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] TS950 and Win7 I had a hard drive crash on my PC that was running WinXP, so decided to upgrade to Win7-32. I can no longer maintain contact with my TS950. I tried a USB to serial port convertor with the same results as my legacy serial port. I loaded DX4Win on a different PC that is running Win7-64 with the same results. My IC7000 works just fine with DX4Win and Win7. Has anyone experienced this problem or maybe has an updated .rig file for the TS850/950? Thanks. 73, John, K9EL ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html