Bill, I also have a TS570S (bought in the US) and get the same results, more or less. In my case the radio control drops out after a variable time delay, which can be anything from 10 seconds or so to a couple of hours. I get the same messages as you. I am also using DX4Win 8.04 but the same problem has always existed with various earlier iterations of the program. I have had the rig for about ten years and have always used DX4W. I also have a TS950SDX which works FB, and when I have raised this questions previously I have been advised that if the prog works with one it should work with the other.
My PC is a Dell Dimension E520 desk top, running Windows XP Home SP3, my settings in Preferences are the same as yours, except that I am using 4800 baud. I have tried various speeds with any effect. I am using a MicroHam DB9K CAT interface with the PC. After trying to resolve this problem without success I decided to just live with it. I have found that switching the 570S off and back on again reconnects the CAT. If you get any replies that provide a solution I would be very pleased to know. 73 Andy G3SVD -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bill Turner Sent: 12 February 2011 15:57 To: [email protected] Subject: [Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost) I've been working on computer control for the TS-570S and have it going for N1MM, FLDigi, and HRD but I'm missing something for DX4WIN. The CTRL indication appears on the Kenwood front panel screen for 10 seconds, then disappears and I get an error message: Radio timed out Radio interface has been disabled Here is the setup: DX4WIN 8.04 User Level set to advanced Compaq Presario 1500 laptop Using a Radio Shack Gigaware Serial to USB converter assigned to COM10 Windows XP, SP3 Transceiver: Kenwood TS-570S Preferences: Radio: Kenwood 570S Address 00 Default checked Baud Rate 9600 Default checked RTS checked Kenwood without S meter (However, 570 does have an S meter ) COM port 10 Poll rate (ms) 500 (5000 does not work either) Max Tries 6 Transverter offset 0 Bands None Kenwood Transceiver Menu: 32 Off 33 2 34 6 35 96-1 36 on 37 on If someone is running a similar combination, could you compare your settings and see what I've missed? Thanks, Bill, W4WNT ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
