Hi Wayne

Did you install the LPTdriver ?
Can be found under c:\dx4win\drivers 
If not do it and normally your problem will be solved

Guy ON4AOI

> -----Oorspronkelijk bericht-----
> Van: [email protected] [mailto:dx4win-
> [email protected]] Namens Wayne Splawn
> Verzonden: maandag 14 februari 2011 23:46
> Aan: [email protected]
> Onderwerp: [Dx4win] TS-2000 Radio Interface Problem / Rig Contro
> 
> Hi,
> I recently downloaded a copy of DX4WIN, ver 8.04, and installed the
> license.
> This effectively upgraded me from an earlier version that I owned.
> 
> I am seeking help because I have a problem with the radio interface
> software
> not working for my TS-2000.  After starting the radio, the DX4WIN
> banner
> will show "(not responding)" and an error message appears shortly after
> that
> -  that message is "Radio timed out.  Radio interface has been
> disabled"
> 
> Radio Setup Parameters are:
> .     Type=Kenwood 2000
> .     Address=00
> .     Baud Rate = 9600
> .     COM Port = COM2
> .     Poll rate = 5000; but have tried other settings
> .     Max tries = 6
> .     Transverter=0
> .     Band= None
> Menu 56 on the TS-2000 is set to 9600 baud.  Windows device manager
> reports
> 9600, 8, n , 1 for COM2 settings.
> 
> I am running the software on Windows-7 Professional and I have verified
> the
> I/O address is 02F8 for COM2.
> I have tried Windows-7 native as well as the XP (SP3) compatibility
> mode on
> dx4win.exe.
> I have tried DTR/RTS high and low.
> I have tried other baud rates & settings but no change DX4WIN seems to
> work
> fine for logging, etc.  Just the radio interface is the problem.
> 
> HERE'S THE CATCH:  The radio DOES respond to Kenwood's ARCP software
> without
> any changes in cables, COM settings or other adjustments.  I can
> shutdown
> DX4WIN and can immediately start ARCP--- ARCP works fine and I have
> complete
> software control over the radio.  This leads me to believe there is
> something in DX4WIN that I'm not setting correctly.
> 
> Can you offer any suggestions?
> 
> Tnx & 73
> Wayne / WA7NE
> 
> 
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to