Oh, goodie! My radio has five preset bandwidths: 250 Hz, 500 Hz, 1.8 kHz, 2.4 kHz and 3.0 kHz. Now I just have to figure out what the radio considers to be wide, medium and narrow. :(
Thanks, Mel. Dick At 08:06 PM 2/16/2011, Mel wrote: >Yes and no... > >You can set your bandwidth to wide, medium or narrow, not a specific >bandwidth. Also, it's not mode specific... if you use medium, for >example, it will be medium for all modes. What that corresponds to in >bandwidth depends on how you set up the radio. > >On 2011-02-16 22:51, Dick Flanagan wrote: >> When I use DX4WIN to move to spots with my IC-7700, the radio is set >> to default bandwidths of: >> >> CW - 250 Hz >> RTTY - 250 Hz >> SSB - 1.8 kHz >> >> How can I change these default spot bandwidths to: >> >> CS - 250 Hz >> RTTY - 500 Hz >> SSB - 2.4 kHz >> >> Are these contained in the .rig file and, if so, are they easily changed? >> >> Dick >> -- >> Dick Flanagan K7VC >> [email protected] >> >> ______________________________________________________________ >> Dx4win mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > > > > -- Dick Flanagan K7VC [email protected] ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
