Darn, I missed that, sorry for the band width. Closing the program an re starting also seems to clear it but I shall try the filter selection swap next time, certainly more convenient.
73 John Zl1BYZ. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Reisert AD1C Sent: Monday, 2 May 2011 04:02 To: John Shaw Cc: [email protected] Subject: Re: [Dx4win] Bug in reports On Sat, Apr 30, 2011 at 11:20 PM, John Shaw <[email protected]> wrote: > I have found that after doing a DXCC progress report that when I go > back to logging some more QSOs the new QSOs are not used to update the > spot list colours and can't be found in the log after logging until I > close the program and re start, then all is well they were logged just > fine but it was a bit perplexing the first time I noticed it. I think this problem was reported on the reflector a month or two ago: http://www.mail-archive.com/[email protected]/msg14592.html There is no fix, but a work-around is to choose a different Filter | Selection, then go back to your usual one. 73 - Jim aD1C -- Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
