I concur. You should notice in the bottom of the F3 window the UPDATE QSO button is only active for USA stations. For DX it is grayed out. To accomplish what you want to do for DX (non USA) stations is to use F3 to open the CALLSIGN/MGR LOOKUP window. The address will appear in this window. Then click on the first line of the address and scroll down so the complete address is highlighted. Then do an ALT+M which will transfer the address to the QSL MGR box in the main logging window. This will be the address that is printed on labels when you print QSL labels.
Note: Be sure the AUTO UPDATE tab is clicked when using F3 so that when you log or check another call the address will follow to the new call. GL, Alan, K7ACZ -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mel Sent: Sunday, June 12, 2011 2:34 PM To: LANNY RATHERT Cc: [email protected] Subject: Re: [Dx4win] 2011 Radio Amateur Call book & DX4WIN That is correct. It only works for USA stations. Only the FCC data is in a fixed format that DX4Win can rely on. On 2011-06-12 17:16, LANNY RATHERT wrote: > I have downloaded the call book to my hard drive and updated the Ext Data to > reflect the RAC . > No problem there , but when I try to add the info to the qso window it will > not copy to the QSO Window. > It seems to work ok for Stateside stations, but not DX. The DX info pops up > in the window , but when I click on the "Update QSO, nothing happens. > What am I doing wrong. Thanks in advance > Lanny N0JZ ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
