On Sun, Jun 19, 2011 at 4:28 AM, Dick Grolleman <[email protected]> wrote:
> I have the following problem, for a long time now, but can not find a > solution. > The band map does not follow the radio on 10 and 6m, all the other bands are > OK. I do use DX4WIN 8.05 with a K3 and a micro Keyer II. > I do zoom in on a portion of 6m or 10m, and the red arrow is on the frequency > where I am at. If I dial the radio outside the portion the bandamap does not > follow the radio. The box follow radio is marked! > The frequency on the top of the band map gives the radio's frequency correct. > Anyone else having this problem? I confirmed the same problem here today with an ICOM radio. All bands scroll the bandmap (if you tune past the edge) except 10m and 6m. - Jim -- Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
