Hi, Can anyone on the reflector please help?
I have two Kenwood rigs a TS950SDX and a TS570S (primarily used on 6m). The TS950SDX will connect and stay connected to most logging programs (DX4Win, Wintest, MixW, SD etc) via a Microham usb adaptor. However despite my best endeavours The TS570S won't stay connected to DX4Win. It will to the other programs. I always thought that all Kenwood radios used the same settings as does the K3 but that it obviously not the case. I have been trying with the TS570 settings since I upgraded to ver.8 and I have just updated DX4Win to ver. 8.05 and I have tried the TS480 settings. In the past I have tried all the different rig settings in FILE/PREFERENCES/RADIO always with the same result. The rig will connect and both leds on the MicroHam DB9-K usb interface flash showing that it is talking to the PC. But after a few minutes the program indicates that it has lost communication with the rig and everything freezes for a couple of minutes. This is quite frustrating especially now when I am chasing the new PJs on 6m. 73 and many thanks Andy G3SVD ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
