Dieter, DX4WIN should change frequency just as fast as WinTest. I use a K3 and frequency changes are very fast. I am not sure what your problem may be, but it could be the rig file in DX4WIN that you are using for the FlexRadio. You also might check Preferences, Radio to see if everything is set up correctly.
Good luck, Dave, N4QS ----- Original Message ----- From: "Dieter Schuster" <[email protected]> To: <[email protected]> Sent: Sunday, July 17, 2011 8:54 AM Subject: [Dx4win] Long duration for doing a frequency change > Hi > > When I grab a packet spot, it takes about 5 seconds to switch the radio to > the new frequency. > I feel, this is a bit long but before I complain I would like to know, if > you consider this a decent value. > > WinTest, which I am using for contesting on the same PC, does it in a > fraction of a second ! > > (DX4WIN 8.05; PC: 1.9 GHz; Flexradio 5000A; @ 57000 QSOs in the database) > > Any suggestions ? > > tnx es 73 de Dieter, DL8OH > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
