According help
cw keying is on pin 1 and pin 17
ptt 16 and 18 (only used when a ptt delay value exists)
Radio 2 is on pin 14 and pin 18
So it should work.
Sorry i have not tested an Lpt port.
Have you run the lptdriver.exe?
It is in dx4w805>drivers directory.
Also under file>preferences>control there is a box called reverse 1/2. It is 
for changing radios but like an idea check and uncheck this also. Maybe a 
bug there? Just thoughts....
73 Kostas sv1dpi


----- Original Message ----- 
From: "Dennis Andrews, F5VHY" <[email protected]>
To: <[email protected]>
Sent: Tuesday, August 09, 2011 7:45 PM
Subject: [Dx4win] CW Keying


>I find the following a bit difficult to believe - but it seems to be the 
>case!
>
> After many years as a DX4win user - starting with v4 but currently on v7, 
> I decided to try CW keying from the program using LPT and the same 
> connecting interface as used for Wintest and other programs - i.e. pin 16 
> for PTT and pin 17 for keying.
>
> It didn't work with the TX seeming to be permanently keyed while the 
> message was being sent. However, trying it on v4, v5 or v6, it works OK. A 
> little more investigation shows that pin16 and pin17 seem to be reversed 
> from v7 onwards - the same happens with v8.
>
> I notice that the reflector shows many problems with CW keying but no 
> apparent resolutions.
>
> Is it really the case that the pin drivers were reversed at v7 but never 
> corrected?
>
> Dennis - F5VHY.
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to