On Wed, Aug 24, 2011 at 7:01 AM, Pete Smith N4ZR wrote: > I am getting back to DX4WIN after a couple of years away, and just > updated to 8.05. In previous versions, there was a way to mark for QSL > only those *DX* stations to which I had not previously sent a QSL for > the same band/mode combination.
Yes, Pete there is supposed to be a way to do this. In 8.05, try this: QSL | Mark QSL band/mode Out of my 100K QSOs, 30K were so marked this way. I did a spot check of a few calls and it appeared to do what you want. Make sure to use the F8 trick to filter out USA stations (you could always clear the flags for USA [or other] stations after the fact, using a filter). I don't know what happens if the "QSL Date" field is set to a date, whether a label is still generated or not (you already sent a card). I suspect NO but I did not check for this. NOTE: If a QSO is marked as Confirmed by either LoTW or eQSL, you will still get a label print flag. This operation only considers the QSL status, not the eQSL or LoTW status. -- Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
