I use com8 for ptt (file>preferences rts ptt) com7 (different) for mmtty. To do this i run mmtty outside dx4win and put under option>setup mmtty>tx com7 Also under misc com-txd
and works Feel free to ask for more help outside reflector 73 Kostas sv1dpi ----- Original Message ----- From: "David J. Strout" <djsa...@comcast.net> To: "DX4WIN reflector" <dx4win@mailman.qth.net> Sent: Sunday, October 23, 2011 5:14 PM Subject: [Dx4win] (no subject) > Unfortunately, I am back to the same old problem. > Don't have COM-TxD (FSK) as a choice under TX Port in MMTTY. > Using WinXP and RigBlaster plus. > I get keying of the rig but only a carrier. Can some one point > me in the right direction, pse. > Dave, W2YC > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html