Knowledgeable Lou, N2TU, came up with the answer. I'm reposting his dead-on response with his permission (he does want it noted that it's just a "stab in the dark," but it worked for me).
Thanks, Lou! Dave, W2PK Dave.... In the DX4WIN rigs file....there are these settings.... [MODES] AM=5;5;N CW=3,7;3,7;N FM=4;4;N RTTY=6,9;6,9;N SSB=1,2;1,2;N Without having a Flex, I would assume if you change RTTY from 6,9; to 9,6 it will go into the DIGU.... You can copy the existing FLEX file, rename it to FLEX-Test, change the Modes, RTTY settings...save it in the Rigs file within DX4WIN...then select FLEX-TEST in the Radio preferences to see if it works...... Again, the above is an' educated' guess without having a Flex in front of me.... Good Luck.... 73 Lou N2TU -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of David M. Monfried Sent: Friday, December 16, 2011 1:53 PM To: [email protected] Subject: [Dx4win] Question re DX4WIN, PSDR, and RTTY Question for those who run DX4WIN with the Flex PSDR: when I click on an RTTY or other digital mode spots in DX4WIN, PSDR jumps to DIGL, rather than DIGU. Certainly not a big deal to click on DIGU in PSDR, but has anyone figured out how to go directly to DIGU? Tnx! Dave, W2PK PSDR 2.2.3 DX4WIN 8.05 Win7/64 ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
