Might be a PTT issue (rig getting keyed into TX with no FSK/AFSK). You did say USB so probably not an "RTS/DTR set high" by the PC issue. You trying FSK for RTTY and audio for PSK31? If not and using AFSK for RTTY, you may need to be in LSB for RTTY since FSK/RTTY mode is usually only FSK on radios. Some ideas. Dan KI6X
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of W9RPM Sent: Wednesday, December 21, 2011 9:38 AM To: mmtty; DX4WIN Subject: [Dx4win] SIGNALINK HI, I got a signalink USB to use for RTTY. My radio is being put into transmit, but no power output. I must be missing something here. It is connected to the Packet Jack in the back of the radio. PSK31 works fine. Any ideas? Thanks, John -- EMAIL: [email protected] WEBPAGE: http://www.w9rpm.com/ Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/ DX and CONTEST CLUB: http://www.w9idx.com/ La Crosse Hams: http://www.lacrossehams.org/ AOL IM: W9RPM YAHOO: W9RPM ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
