> I can change output power and MMTTY display shows normal RTTY
> display at TX, but nobody answers my calls on their frequency !
Do you have another receiver to determine if you have set up the
FT-1000MP correctly? As shipped from Yaesu (default), almost all
Yaesu transceivers (including all models of the FT-1000 series)
will transmit "upside down" in RTTY. It generally necessary to
set Menu 6-1 (FT-1000MP, MK V, etc.) to REV or DIP switch 5
(FT-1000, FT-1000D) to "0" for the resulting FSK to be "right
side up".
73,
... Joe, W4TV
On 3/19/2012 3:43 PM, Radivoj Kar, F6GNZ wrote:
> I've decided to try FSK (no AFSK) with microHAM keyer and have
configured router, DX4WIN and associated MMTTY for FSK as indicated in
Router documentation. RX is ok, on TX FSK COM5 port well indicates
45.5N1.5 and my FT1000MP goes to transmitt in RTTY LSB mode, I can
change output power and MMTTY display shows normal RTTY display at TX,
but nobody answers my calls on their frequency ! I have no test bench
nor another RX at hand to check what might be happening. Has anybody an
idea what's going on???
> 73, Radi F6GNZ
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
