Greetings - Is there a way to change the address for LPT1 (or any other ports) in DX4WIN? My new PC doesn't have any built-in parallel or serial ports, so I got a plug-in card with 2 serial and 1 parallel ports. Evidently, they do not use the "default" Windows addresses for ports and DX4WIN cannot find the parallel port for CW keying. N1MM has the ability to change the port addresses, so I was able to make that work, but I cannot find that setting in DX4WIN. The serial ports work fine with both programs.
Setup: DX4WIN v 8.05; WIN 7 home premium 64 bit; Gigabyte mobo with i5 CPU; StarTech PEX2S1P552B port expansion card. This is NOT an "lptdriver" or "run as administrator" problem. I am hoping to avoid having to buy another expansion card, presuming I can find one which allows me to set the port addresses. Thanks. 73, Mike W3MC ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
