I have also used the 950 with the same settings as described below. There was a hang problem with XP, but, moving to Win 7 seems to have solved that. I would be interested in the modified RIG file, however
Good Luck AJ8B => Bill On Fri, May 4, 2012 at 7:19 AM, Ernie <w8eh.er...@gmail.com> wrote: > John, > > Yes I have the FT950 working with DX4WIN. Here is my setup. Defaults are > checked, address 00 and baud 4800. I have poll rate set for 2000; RTS > and DTR unchecked. On the radio CAT BPS 4800, CAT TOT 3000, CAT RTS > off. I am using a standard USB to COM adapter on comm port 5 with a > simple gender changer to plug into the rig. > > Once you get that working you will need the RIG file that I modified. > The one that comes with DX4WIN has some timing problems that may cause > some computers to hang the program at times. I can send a copy of my > modified RIG file direct to you if you want. > > Ernie W8EH > > > > On 5/4/2012 12:27 AM, W9RPM wrote: > > Anyone have a 950 that they have working with DX4WIN? Thanks, John W9RPM > > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
