Hello Bill at al... >I am trying to use a Winkeyer in conjunction with a K3 & DX4Win. I >have assigned the win keyer to a separate USB port and it works fine as a >stand alone keyer. but as soon as I bring the K3 into play by using a >RS-232c to USB interface cable the K3 goes into a key down position. I >used device manager and know exacxtly what USB ports are assigned to both >the Winkeyer and the K3. Anyone offer any setting information or am I >just doing something dumb? > > 73 > Bill N4NX
Did you install the DX4WIN's LPTDriver? If not sure, look for the folder ..\dx4w805\lptdriver there should be two files: unins000.dat unins000.exe If you don't find them, look for the folder ..\dx4w805\drivers and run lptdriver.exe You must have Administrator rights... I've heard this driver is required to cw keying... 73 de Isidro, EA8NQ E-mail: [email protected] ---------------------------------------- Visit the EA8NQ's web page (in Spanish): http://ea8nq.ure.es/ ---------------------------------------- ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
