On Sat, Oct 27, 2012 at 6:22 PM, Ken Leon <[email protected]> wrote: > My primary rig is Yaesu-990 with Serial Interface for DX4WIN v8.05 on COM3 > to Lenovo laptop running WIN7 64 bit. > > My older ICOM-728 works well with COM4 via USB to CI-V cable to secondary > laptop. How can I configure as Radio #2 on primary laptop.
In DX4WIN, go to Preferences | Radio. In the "Second Radio" section, choose Type == "ICOM 756". In the Address box, unclick "Default" and enter "38". In the Baud rate box, unclick Default then enter the baud rate your radio is set to. Set COM Port to the COM port on your computer that the IC-728 is connected to. After saving your preferences, you should be able to use "Shift-Control-F12" to switch DX4WIN to the second radio. Type F9 and see if it is tracking your band changes on that radio. 73 - Jim AD1C -- Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
