Small edit to example filter set-up macro... a newline was dropped in my cut and paste...
acc/sp 1 on HF and by_zone 1,2,3,4,5,6,7,8,9,10,11,14,33,35,40 acc/sp 2 on VHF and (call_zone 2,4,5 or by_zone 2,4,5) rej/sp 1 by w3lpl An explanation of the above... On 160-10 I want to see spots from NA and Western EU On 6 and up just from spotters or stations on the East Coast Reject W3LPL spots You can also refine it by band or range of bands if you wish... just use the help command or consult the on-line documentation Once you set up your filters on a DX cluster they will be persistent over time unless the sysop does a major reset... -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mel Martin Sent: November 9, 2012 21:17 To: 'Ray Benny'; 'Jim Reisert AD1C' Cc: 'DX4WIN Reflector' Subject: Re: [Dx4win] Use with VE7CC My playbook is playing tricks on me so I'll try again from my desktop. VE7CC's software does not filter anything... it just provides a GUI to set up filters on the spot server. You can do the same with DX4Win my creating a macro file and invoking it with a macro key. The exact commands vary with the type of server. I usually use DXSpider so here is an example DXSpider file: acc/sp 1 on HF and by_zone 1,2,3,4,5,6,7,8,9,10,11,14,33,35,40 acc/sp 2 on VHF and (call_zone 2,4,5 or by_zone 2,4,5) rej/sp 1 by w3lpl You can do the same for AR Cluster, but the actual commands will be different Documentation can be found for each server type... the ones I know about are AR Cluster (ve7cc server side), PacketCluster (the original), DXSpider (multi-platform clone of PacketCluster) -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ray Benny Sent: November 9, 2012 19:09 To: Jim Reisert AD1C Cc: DX4WIN Reflector Subject: Re: [Dx4win] Use with VE7CC Is there a way to easily select bands/filter bands ln DX4WIN like VE7CC does it? I spent alot of time on one band only and it drives me crazy to have the one spot that I am looking for go off the screen before I can click on it! I have asked some other DX4WIN users but they say no. Ray, N6VR On Fri, Nov 9, 2012 at 1:57 PM, Jim Reisert AD1C <[email protected]>wrote: > On Fri, Nov 9, 2012 at 10:15 AM, Tom Berry AA4VV wrote: > > > I would like to use VE7CC for my spots in DX4WIN. The problem I would > > like to only look at 20, 17, 15, 12, 10 meters. I try loading VE7CC > > and setting it up then exit and run DX4WIN and using VE7CC for spots. It > > still shows 160, 80, 40. Is there a way to do this? > > http://dx4win.ad1c.us/cluster/index.html#VE7CC > > Also, you can "gray out" bands using the PACKET3 tab of your preferences. > > -- > Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
