Larry, This is not possible and your beam could be pointing wrong also If the station gets in via LP. With F11 rotator will move Short path and ctrl+F11 via LP
Guy ON4AOI -----Oorspronkelijk bericht----- Van: [email protected] [mailto:[email protected]] Namens Larry McMillen Verzonden: donderdag 22 november 2012 16:06 Aan: [email protected] Onderwerp: [Dx4win] Rotator Control I am using DX4WIN, Ver 8.05. When I double click on a DX spot, the frequency and mode of my transmitter (ICOM IC-756PROII) is changed to the spot frequency and mode. Is there any way I can configure so that the rotator will also rotate to the spot station bearing? Larry, W4WIV ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
