Guy, thanks much for working on this. The 3000 works with your 5000 rig
file except when I click on a Split spot it will put the rig in split,
but doesn't do the correct Mode in VFO B, and then Times out. With the
950 Rig file the rig will go into Split, but VFO B, not correct mode.
But the radio doesn't time out. Thanks again, John W9RPM
On 12/5/2012 8:39 AM, ON4AOI wrote:
Hi John and others,
I am working on a FTDX3000 rigfile now
But don´t know yet if it will work ok
The following modes will not work like they aren´t in the ftdx5000 rigfile
PKT-FM = A, FM-N = B, PKT-U = C and AM-N = D simply because ABCD etc are not
recognized yet for modes in DX4WIN,
But now comes the worst part the MODE command
Cat manual page 12 shows
P1 0: main (VFO-A)
P1:1: sub (VFO-B)
FTDX5000 cmd = MD0; = in this case reads mode from VFO-A
FTDX5000 cmd = MD1; = in this case reads mode from VFO-B
For setting the modes on FTDX5000 its something similar
FTDX5000 cmd = MD01; = in this case sets mode from VFO-A to LSB
FTDX5000 cmd = MD11; = in this case sets mode from VFO-B to LSB
First number is for the VFO selection and second number(or letter not yet
supported by dx4win) for the mode.
Page 11 from the FTDX 3000 CAT manual shows now a BIG PROBLEM
P1 = 0:fixed
So until I find a proper cmd for setting VFO-B to the correct mode it will
not work
Or it’s a bug in there firmware or they simply forgot it to add in the
manual
I know some bugs in the ftdx5000 firmware but they don´t care about users
reporting this
Test my ftdx5000.rigfile and if its working OK then its only a bad manual
If not there is bigger problem that I can´t solve if I don´t find a cmd
Lurking further in the CAT cmd
Guy ON4AOI
-----Oorspronkelijk bericht-----
Van: [email protected] [mailto:[email protected]]
Namens W9RPM
Verzonden: woensdag 5 december 2012 5:10
Aan: DX4WIN; [email protected]
Onderwerp: [Dx4win] rig control
Been trying the 3000 with DX4WIN using the FT950 Rig file. Other than being
slow, I notice that when in either SSB or RTTY and Clicking on a spot from
the DX spot window, the rig will go to the correct Frequency, but will not
put VFO B in the correct mode. Always goes to CW. I am not one to be able to
play with the Rig Files, but hope that Paul or someone can get a Rig File
for the 3000. Thanks, John W9RPM
--
EMAIL: [email protected]
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/ DX and CONTEST
CLUB: http://www.w9idx.com/ La Crosse Hams: http://www.lacrossehams.org/ AOL
IM: W9RPM
YAHOO: W9RPM
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
EMAIL: [email protected]
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/
DX and CONTEST CLUB: http://www.w9idx.com/
La Crosse Hams: http://www.lacrossehams.org/
AOL IM: W9RPM
YAHOO: W9RPM
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
