Normally your log is saved in name.dxl file in dx4win/save directory.
Beside this there is a backup file with the name name.~xl
You need to rename this file to something like backup.dxl and open it.
If it is better, save as and put the name you want.
If you have enabled the backup directory probably your log is there also.
I wonder if you had another directory where you save your log and after
reboot, dx4win came back to its original configuration where it found an
old dxl file. Search your computer for *.dxl and *.~xl
good luck
73 Kostas, SV1DPI
Στις 20/3/2013 15:51, ο/η andyphewitt έγραψε:
Today I had a situation, my screen froze and to get out of it I had to
reboot. When I rebooted and started DX4Win it opened apparently as normal
but only showing QSOs up to March 3rd. I have some ADI files covering part
of the missing log which I produced on March 11th and again on March 19th
for LOTW upload. I assume that I can just re-import these into DX4win? They
are stored in the SAVE directory. However between the upload yesterday and
the loss at about mid-day today I had various QSOs with T2GM, H44G and H40T.
Except, possibly for the most recent when the screen froze, I am sure that I
saved them regularly, it's a habit.
How can I rescue these from the Back-up folder in the SAVE directory? Which
files contain that information? How do I import it to DX4win.dxl?
Any help will be greatly appreciated.
73
Andy G3SVD
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
