If you are trying to configure a splitter function, you could try
connecting HDSDR/OmniRig to Router's 2nd CAT port. HDSDR/OmniRig
will be limited to the rig connected to MK II but I assume HDSDR
is limited to following one rig anyway. There is certainly no way
that OmniRig can connect to two rigs via MK II. If allowing HDSDR
to use Router's 2nd CAT port does not work, DX4Win will probably need
to provide an OmniRig option - one in which OmniRig serves both HDSDR
and the logger.
Note, if you use Router's 2nd CAT port, it will be necessary to set any
polling from HDSDR/OmniRig to the very minimum (slowest possible) to
prevent overloading the control channel between Router and the MK II.
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
support e-mail: [email protected]
73,
... Joe, W4TV
On 6/22/2013 8:06 AM, Radivoj Kar, F6GNZ wrote:
I have
updated my shack with an SDR which I want to use for reception only and keep
my existing MK2, FT1000MP+ IC706 (for
50 MHz) for transmit only.
I can control
SDR with HDSDR program and synchronise FT1000MP/IC706 frequencies/modes via the
Omni-Rig program interfaced with HDSDR. This combination works perfectly, but
now my DX4WIN becomes useless as it can’t read nor control the radio, saying
“ie_Open,
device already open” and
“Could not
open COM4 for keying, ie_Open, device already open” when I try to Start the
Radio.
So, I can’t
log the QSOs with related radio data (mode, freq’s) nor use spot clicks to set
up the TX/RX frequencies, nor control my antenna rotator.
Is there
any way to make the above combination work together???
Best 73,
Radi F6GNZ
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
